Shaded-pole asynchronous motors have a relatively simple structure, mainly consisting of stator, rotor, shaded-pole coil and other components, and the YJ58 series is no exception. This simple structure makes the motor's manufacturing and maintenance costs low and its reliability high. This series of motor adopts shaded-pole starting method, which has good starting performance and can start smoothly at lower voltage, and the starting current is small, which has less impact on the power grid. The application of all-copper material ensures that the motor has good electrical conductivity and heat conduction, which makes the motor more stable during operation and reduces the failure caused by overheating.

Product specification
Product name: Condenser
Materials: Copper tube Copper fin, Stainless steel plate
Tube O.D：9.52mm
Aluminum fin: Hydroponic fin or bare fin
Fin type: Smooth sine wave fin
Fin space:2.5mm ect.

Product specification
Product name: Condenser
Materials: Copper tube aluminum fin, galvanized plate 
Tube O.D.:7mm. 7.94mm, 9.52mm, 12.75mm, 15.88mm 
Aluminum fin: Hydroponic fin or bare fin
Fin type: Flat fin, Window fin, louver fin, Smooth sine wave fin
Pitch of holes and rows: 19.05*12.7mm; ect.

Product specification
Product name: Condenser
Materials: Copper tube aluminum fin, galvanized plate 
Tube O.D：7mm、9.52mm
Aluminum fin: Hydroponic fin
Fin space:2.6mm
Pitch of holes and rows：19.05*12.7mm; ect.

Product specification
Raw material: Bundy tube (steel tube coated with copper).8x 0.71mm, Application: Refrigeration parts
Structure:Bundy tubes welded with steel wires
Customized:We can produce according your design Low carbon steel wire:1.0~1.6mm
Surface:Cathodic electrophoresis, salt spray test ≥96H.

Product specification
Raw material: Bundy tube (steel tube coated with copper). 4.76 x 0.71mm, Application: Refrigeration parts
Structure:Bundy tubes welded with steel wires
Customized:We can produce according your design Low carbon steel wire:Φ1.0~1.6mm
Surface:Cathodic electrophoresis, salt spray test ≥96H.

Product specification
Rated heat capacity：10kW~20kW
Input power：5kW~8kW 
outlet temperature： Between 30°C - 85°C.
Maximum drying temperature：Around 70°C - 90°C.
Air volume： 500m³/h、2000m³/h 。
Energy efficiency ratio (COP)：Mostly between 2.5 - 5.
Fan power：100W~300W 
Unit weight： 500kg~1500kg 
Overall dimensions (L×W×H)：in metres.for example 2×1×1.5m 
Specific parameters should be based on the actual product.

Product specification Product name:316 Stainless Steel Aluminium Fin
Materials: Copper tube aluminum fin, galvanized plate Tube O.D.: 7mm. 7.94mm, 9.52mm, 12.75mm, 15.88mm Aluminum fin:Hydroponic fin or bare fin
Fin type:Flat fin, Window fin, louver fin, Smooth sine wave fin Fin space:1.1--5.8mm
Pitch of holes and rows: 19.05*12.7mm;25.5*22mm; 25*21.65mm; 31.75*27.5mm;38.1*33mm, ect.

1. This series motor adopts the pure aluminum enameled wire, more advantageous than copper wire motors in the aspect of price,its performance is basically consistent with that of the cooper wire motor.
2. This series of motors are applicable to refrigeration equipment such as refrigerator, freezer, wine cabinet, fresh-keeping cabinet, radiator, evaporator, etc.
3. The Rated power line specification and size "L" of this series of motors can be produced according to customer's requirements.
Instructions for Use :Operating mode::S1 insulation grade: : Class E
Protection Class: :lP41 Environmental Temperature: : -30C~ + 50°C

1.This series motor has advantages, such as safety, reliability, low noise, little vibration, excellent starting performance, and long service life.
2.This series motor is applicable to refrigerators, freezers, wine cabinets,fresh-keeping cabinets, radiators, evaporators, and other refrigeration equipment.
3.This series motor's outgoing line specification and dimension “L" may be produced according to the user requirements.
Instructions for Use :Operating mode::S1 insulation grade: : Class E
Environmental Temperature: : -30C~ + 50°C